Forum der RAG MMB im Verband der Reservisten der Deutschen Bundeswehr e.V. und IG Militärmodellbau

when i started the gtk boxer i only was planned to let open the door but saw gerhards tread when i was busy onto it

http://www.rcpanzer.de/apboard/thread.p ... =1&seite=1

he gave me some thoughts in his builds i wonna copy in my build and take it further into detailing step by step

http://www.rcpanzer.de/apboard/thread.p ... =1&seite=1









first cleaned up the reinforcementrod in the dooropening

first pics are gerhards onres after them my build goes further




gerhards rearhatch




my coutted out rearhatch








the real deal rearhatch

used minihinges from asiatam 5x5mm together 5x10mm

dryfitting rearhatch with boxerbody



final result and working door




real pics of the beast

did a few mods at Plastic and Steel modelfair

corrected the driversight it was gleud straightforward by ludwigs polisterolmadchen but it has to be under hook , so cutted it dawn , corrigated the hook and regleu it all together again it look so much better after all

looking at gerhards build i saw the headprotectors on the inside of the roofhatches , so i did the same , cutted them out of 1mm styreen












i will soften the edges with vallejo putty so it will look at a real headprotector

did some work on the rearhatch too

found a second donorcar for the boxer

founding the donorcar ludwig advised me but hard to get it

Truck HQ710 4WD Maßstab 1/18

Technische Daten:

Modell: RC Monstertruck " Truck HQ710" 4WD Maßstab: 1:18

Motorart: 380er Elektromotor Luftgekühlt High-Speed

Stromversorgung: 7,2V 1100mAh Ni-Cd Akku max.

Geschwindigkeit: ca.30 km/h

Fahrzeit: bis 20 Min.

Karosserie: aus Lexan

Abmessung (L x B x H): 250mm x 190mm x 110mm

http://www.gordo-toys.de/RC-Monstertruc ... -RTR-/-4WD"]http://www.gordo-toys.de/RC-Monstertruc ... -RTR-/-4WD

boxers drivemotor and speedcontroler



http://www.integy.com/st_prod.html?p_prodid=28380&p_catid=25&ratesortby=New#.WfIKKmi0NhE

Specifications
Type: 1/10th Brushed, Waterproof
Cont./Peak Current: 60A/360A
Input: 2-3S LiPo/6-9 Cells NiMH
BEC Output: Switch Mode:6V/3A

Wires & Connectors
Input Wires: Red-16AWG / Black-16AWG
Output Wires: Blue-16AWG / Yellow-16AWG
Input Connectors: Tamiya-style Connector
Output Connecotors: 4.0 Bullet Connectors (Female)

Size & Weight
Dimensions: 36.5x32.0x18.0mm
Weight: 39g

ESC Motor Wind Limits (540/550 Size Motors)
2S LiPo: 12-Turn and up
3S LiPo: 18-Turn and up

Included Motor
Type: Brushed
Size: 54

this gonna be my drivemotor for the boxer both watersave!!!

probaly gonna use these gearboxes from ebay for my scale 8x8 suspenstion





and modify two off them for an axle on the back too like gerhards one